L 2660 Horizontal Lathe Metal Universal Tour Lathe Machine Metal Processing Machine Machine Tool

• Customization: Available
• After-sales Service: Support
• Warranty: Support
• Model NO.: L2660X1500
• Type: Horizontal Lathe
• Processing Accessory: Centre CNC Lathe
• Guide Rail: Horizontal Guide Rail
• Tool Holder: Single-tool Holder CNC Lathe
• Power Source: Electric
• Controlling Mode: CNC
• Automatic Grade: Semiautomatic
• Setting Mode: Floor-type
• Precision: High Precision
• Certification: CE, ISO 9001
• Condition: New
• Transport Package: Standard
• Specification: 3000× 1250× 1400
• Trademark: HMT
• Origin: China
• HS Code: 84581900
• Production Capacity: 1000sets Per Month

Product Description

Horizontal Machine Tool 

L 2660

Product Description

 

 The headstock gear-box, apron and bed ways are made of high quality casting iron, and are all casting with the resin sand foundry technology and aging process. The bed ways are induction-hardened, with hardness around HRC 52.
The spindle supported by 3-pointed high-precision bearings and all gears in headstock are precisely grinded, the spindle turns smoothly at high speed. High rigidity spindle system, with absolute temperature rising no higher than 35ºC.
Rapid feed system to improve efficiency . Wide range of feed and pitch are available without changing gears, distance between centers  1000-5000mm, this lathe covers wide range of working pieces.
When rapid feeding is on, the tool slide longitudinal travel hand -wheel will be automatically disfunctioned.
Reliable  safety  devices  such  as  footbrake  and  emergent   power-off  switch  are  assembled.  Adjustable  overload protection device is also installed in the feed system.
The tool post adopts the structure of ratchet pawl,and can be relocked by turning the lever forjust half a lap.
Tallstock are equipped with double-locked mechanism, smooth and effortless movement is ensured by the elastic scroll devices    underneath.

Product Parameters

 

 

I t e m s	Unit	6150B	6266B	6150L	6166L	6176L
Swing over bed	mm	500	660	500	660	760
Swing over cross slide	mm	300	430	300	430	530
Distance between centers	mm	1000,1500,2000,3000
Swing in gap	mm	710	870	710	870	970
Width of gap	mm	240	240	240	240	240
Width of bed	mm	390
Spindle nose		D8
Spindle bore diameter	mm	82		105
Morse taper of spindle center		M6		1:20
Spindle speed	rpm	9-1600(24 steps)		6-1120(24 steps)
Max output torque of spindle	NM	1500
Range oflongitudinalfeed	mm/re	0.028-6.43		0.063-6.43 (0.0025-0.25in/rev)
Range of cross feed	mm/rev	0.012-2.73		0.027-2.73 (0.00106-0.107in/rev)
Lead screw pitch		12mm( metric system)/2tpi. ( inch system)
Metric threads	mm	0.5-224(48 kinds)		1-224(46 kinds)
Inch system threads	t.p.i	72-1/8(46 kinds)		28-1/8(42 kinds)
Module threads		0.5-112mm(42kinds)
Diameter pitch threads		56-1/4DP(45 kinds)
Cross slide travel	mm	340	360	340	360
Top slide travel	mm	150	200	150	200
Section specification of tool post	mm	25×25
Longiudinalrapid traveling speed	m/min	4.5(50HZ)/5.4(60HZ)
ransversalrapid traveling speed	m/min	1.9(50HZ)/2.3(60HZ)
Morse taper of tallstock center		M5
Max travel of tallstock quill	mm	150
Tailstock quill diameter	mm	75
Main motor	kw	7.5	11
Rapid travel motor		250W/1360rpm
Coolant pump moto		90W/25L/min

Detailed Photos

 

Stander Configuration

1. 250mm 3-jaw chuck for 50B, 50L series;0325mm 3-jaw chuck for 66B, 66L, 76L series

2. Thread chasing dial
3. chip guard for L≤2m lathe,follow chip guard for L≤3m lathe
4. foot brake
5. oil gun
6. Live center 5#
7. center 5#
8. center sleeve

Optional Configuration

1. 630mm Face plate for 50 series

800mm Face plate for 66, 76 series
2. 400mm 4-jaw chuck
3. 20-140mm Small steady rest
4. 130-260mm Large steady rest
5. 2680mm Follow rest
6. 250mm Drive plate
7. 4-position stop for saddle
8. 4-position stop for cross slide
9. Micro stop for saddle
10. Quick change tool post
11. Damping washer
12. Taper turning attachment(TTA)
13. Halogen work lamp
14. Digital readout(DRO)
15. CE standard compliance
16. Chuck cover

Factory

 

Certifications

Packaging & Shipping